Description:
Electric Heating Element of Cartridge Heater with Flange is widely used in industry mould heating. Compared with the same heating element of high thermal, cartridge heater can save 5% of electric materials, and heat efficiency can reach 90%.
Cartridge heater is cylindrical electrical heating elements with stainless steel sheath, which watt density can reach 25 W/cm2 and their operating temperature can go up to 800°C (1472°F)
Cartridge heater is a piece of heating elements made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr20/80). It is used to heat in plastic injection moulds, dies, platens ….
Applications Area:
Liquid Immersion
Plastic Molds
Labeling
Medical Equipment
Platens
Packaging Equipment
Hot Stamping
Sealing
Injection Molding
Features:
Nickel chromium resistance wire |
Assures even, efficient distribution of heat to the sheath |
Magnesium oxide insulation of specific grain and purity |
Results in high dielectric strength and faster heat-up |
Incoloy® sheath |
Resists oxidation and corrosion from many chemicals, heat, and atmospheres |
Minimal spacing between element wire and sheath |
Results in lower internal temperature Accommodates a design with fewer or smaller heaters operating at higher watt densities |
Conductor pins |
Provides a metallurgical bond to the resistance wire Ensures a trouble-free electrical connection |
UL® and CSA approved flexible stranded wires |
Lead insulation rated to temperatures of 800oC |